Free access until 31 December 2026 · Physics and Maths questions and notes, updated continuously · Build a test · Get an email before anything changes

ExaminerPrep › Question bank › IAL Maths › P2.7 Stationary points and optimisation

Edexcel International A Level Maths · P2 · Pure Mathematics 2

Stationary points and optimisation

28 free, high-quality past-paper-style questions on Stationary points and optimisation for Edexcel IAL Maths, each with a full mark scheme. For when you have finished the past papers, or want to practise one topic at a time.IAL Maths notes and flashcards →Not sure of your level? Diagnostic test →Multiple choice or structured questions, with the mark scheme as a separate PDF.28 new this month · 243 marks · Updated 26 October 2026 · Created by Evan Kotronis with AI assistance · How questions are checked

1IALM-P2-7-B-01 P2 · ASEasy6 marks

A cubic curve C is defined for every real value of x by y = x3 − 12x + 5. It has two turning points.

(a)

Find dy/dx.

(1)
(b)

Find the coordinates of the stationary points of C.

(3)
(c)

Use the second derivative to determine the nature of each stationary point.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
3x2 − 12B1
Part (b)
sets 3x2 − 12 = 0M1
x = 2 and x = −2A1
(2, −11) and (−2, 21)A1
Part (c)
d2y/dx2 = 6x, substituting both x-valuesM1
at x = 2: 12 > 0 so (2, −11) is a minimum; at x = −2: −12 < 0 so (−2, 21) is a maximumA1

Model sketch

OxyC(−2, 21) maximum(2, −11) minimum(0, 5)
Figure: model sketch of C with its stationary points

Common error: Finding only x = 2 from x2 = 4. A square has two square roots; the negative one gives the second stationary point.

2IALM-P2-7-B-02 P2 · ASEasy5 marks

The function f is defined by f(x) = 2x3 + 3x2 − 36x + 7, x ∈ ℝ.

(a)

Find f′(x), giving your answer in fully factorised form.

(2)
(b)

Find the set of values of x for which f is increasing.

(3)
Show mark scheme
AnswerMarkNotes
Part (a)
6x2 + 6x − 36B1
6(x + 3)(x − 2)A1
Part (b)
critical values x = −3 and x = 2M1
chooses the outside region, since f′(x) > 0 outside the roots of an upward parabolaM1
x < −3 or x > 2A1

Exam tip: “Increasing” is a condition on the gradient: solve f′(x) &gt; 0. A quick sketch of the parabola f′ shows at once which side of the critical values you need.

3IALM-P2-7-B-03 P2 · ASEasy6 marks

The curve C has equation y = 4√x − x, x > 0.

(a)

Find dy/dx.

(2)
(b)

Find the coordinates of the stationary point of C.

(2)
(c)

Determine the nature of this stationary point, giving a reason.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
writes 4√x as 4x½ and differentiates, power reduced by oneM1
2x−½ − 1A1
Part (b)
2x−½ = 1, so √x = 2M1
(4, 4)A1
Part (c)
d2y/dx2 = −x−3/2M1
at x = 4: −1/8 < 0, so a maximumA1

Exam tip: Rewrite roots as powers before differentiating: 4x½ → 2x−½, and then −x−3/2 for the second derivative.

4IALM-P2-7-B-04 P2 · ASEasy5 marks

A rectangular vegetable plot is enclosed on all four sides by 46 m of edging. The length of the plot is x metres and its area is A m2.

x medging: 46 m in total
Figure: the vegetable plot (not to scale)
(a)

Show that A = 23x − x2.

(2)
(b)

Use calculus to find the maximum area of the plot, and justify that it is a maximum.

(3)
Show mark scheme
AnswerMarkNotes
Part (a)
width = (46 − 2x)/2 = 23 − xM1
A = x(23 − x) = 23x − x2 as requiredA1
Part (b)
dA/dx = 23 − 2x = 0M1
x = 11.5, A = 132.25 m2A1
d2A/dx2 = −2 < 0, so maximumB1

Exam tip: When the question says “use calculus”, completing the square is not enough: show the derivative, set it equal to zero, and justify with the second derivative.

5IALM-P2-7-FB-01 P2 · ASEasy7 marks

Figure 1 shows part of the curve C with equation y = 2x3 − 9x2 + 12x − 3, for x ≥ 0. The points P and Q are the two stationary points of C.

123−5−4−3−2−112345678xyOPQC
(a)

Find dy/dx and hence find the coordinates of P and of Q.

(4)
(b)

Use the second derivative to verify that P is a maximum point and Q is a minimum point.

(2)
(c)

Write down the set of values of x for which y is decreasing.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
dy/dx = 6x2 − 18x + 12B1
6(x − 1)(x − 2) = 0M1
x = 1 and x = 2A1
P(1, 2) and Q(2, 1)A1
Part (b)
d2y/dx2 = 12x − 18, substituting both x-valuesM1
at x = 1: −6 < 0 so P is a maximum; at x = 2: 6 > 0 so Q is a minimumA1
Part (c)
1 < x < 2 ft their P and QB1

Exam tip: The figure tells you which point should be the maximum, but the second derivative is what proves it. Write the value of d2y/dx2 at each point and state its sign before giving the conclusion.

6IALM-P2-7-FB-02 P2 · ASEasy6 marks

The curve C has equation y = f(x). Figure 1 shows the graph of the gradient function y = f′(x), which is a quadratic. The graph of y = f′(x) crosses the x-axis at (−1, 0) and (3, 0) and crosses the y-axis at (0, −3).

−2−11234−5−4−3−2−1123456xy(−1, 0)(3, 0)(0, −3)y = f′(x)
(a)

Write down the x-coordinates of the stationary points of C.

(1)
(b)

Using Figure 1, determine the nature of each stationary point of C. Give a reason for each answer.

(2)
(c)

Find an expression for f′(x) in the form x2 + px + q.

(2)
(d)

Write down the set of values of x for which f is a decreasing function.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
x = −1 and x = 3B1
Part (b)
considers the sign of f′(x) either side of each valueM1
at x = −1, f′ changes from positive to negative, so a maximum; at x = 3, f′ changes from negative to positive, so a minimumA1
Part (c)
f′(x) = a(x + 1)(x − 3) and uses (0, −3) to give a = 1M1
f′(x) = x2 − 2x − 3A1
Part (d)
−1 < x < 3B1

Common error: Reading the turning point of the graph in Figure 1, at x = 1, as a stationary point of C. That point is where f′ is least; the stationary points of C are where f′(x) = 0, on the x-axis.

7IALM-P2-7-FB-03 P2 · ASEasy6 marks

A farmer uses 240 m of fencing to make three identical rectangular pens, arranged side by side as shown in the plan in Figure 1. The outside of the enclosure is a rectangle measuring x m by y m, and two internal fences, each of length x m, divide it into the three pens. All 240 m of fencing is used. The total area of the enclosure is A m2.

Pen 1Pen 2Pen 3y mx mx mx mx mPlan view (not to scale)
(a)

Show that A = 120x − 2x2.

(2)
(b)

Use calculus to find the maximum total area, and the dimensions of the enclosure that give it. Justify that your area is a maximum.

(4)
Show mark scheme
AnswerMarkNotes
Part (a)
4x + 2y = 240, so y = 120 − 2xM1
A = x(120 − 2x) = 120x − 2x2 as requiredA1
Part (b)
dA/dx = 120 − 4x = 0M1
x = 30, y = 60A1
A = 1800 m2, enclosure 30 m by 60 mA1
d2A/dx2 = −4 < 0, so a maximumB1

Common error: Counting only two lengths of x. In Figure 1 there are four fences of length x m (two ends and two internal fences) but only two of length y m.

8IALM-P2-7-FB-04 P2 · ASEasy7 marks

Figure 1 shows part of the curve with equation y = x4 − 8x2 + 3. The points A, B and C are the stationary points of the curve, with B on the y-axis.

−3−2−1123−16−12−8−44812xyABC
(a)

Find dy/dx and hence find the coordinates of A, B and C.

(4)
(b)

Use the second derivative to determine the nature of B and of C.

(2)
(c)

Using your answers and Figure 1, write down the set of values of x for which y is an increasing function of x.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
dy/dx = 4x3 − 16xB1
4x(x2 − 4) = 0M1
x = −2, 0, 2A1
A(−2, −13), B(0, 3), C(2, −13)A1
Part (b)
d2y/dx2 = 12x2 − 16, substituting x = 0 and x = 2M1
at x = 0: −16 < 0 so B is a maximum; at x = 2: 32 > 0 so C is a minimumA1
Part (c)
−2 < x < 0 or x > 2 ftB1

Exam tip: Take out the common factor 4x first. Dividing 4x3 − 16x = 0 by x loses the stationary point at x = 0.

9IALM-P2-7-B-05 P2 · ASMedium9 marks

The curve C has equation y = 3x5 − 5x3.

(a)

Find the x-coordinates of the stationary points of C.

(3)
(b)

Find the coordinates of the two stationary points with x ≠ 0, and use the second derivative to determine their nature.

(3)
(c)

Show that the second derivative test gives no conclusion at the origin, and determine the nature of the stationary point there.

(3)
Show mark scheme
AnswerMarkNotes
Part (a)
dy/dx = 15x4 − 15x2B1
15x2(x2 − 1) = 0M1
x = 0, 1, −1A1
Part (b)
(1, −2) and (−1, 2)A1
d2y/dx2 = 60x3 − 30xM1
at x = 1: 30 > 0, (1, −2) minimum; at x = −1: −30 < 0, (−1, 2) maximumA1
Part (c)
d2y/dx2 = 0 at x = 0, so the test is inconclusiveB1
gradient either side, e.g. at x = ±0.5: 15(0.0625) − 15(0.25) = −2.8125M1
negative on both sides, so the origin is a stationary point of inflectionA1

Model sketch

OxyC(−1, 2) maximum(1, −2) minimum(0, 0) point of inflection
Figure: model sketch of C with its three stationary points

Common error: Stating that d2y/dx2 = 0 means a point of inflection. It only means the test has failed; the gradient either side decides.

10IALM-P2-7-B-06 P2 · ASMedium9 marks

A rectangular sheet of card measures 40 cm by 25 cm. A square of side x cm is cut from each corner and the sides are folded up to make an open box (a box with no lid). The volume of the box is V cm3.

40 cm25 cmxx
Figure: the card with a square of side x cm cut from each corner; fold along the dashed lines (not to scale)
(a)

Show that V = 4x3 − 130x2 + 1000x.

(2)
(b)

Explain why 0 < x < 12.5.

(1)
(c)

Find the value of x for which V is stationary, and the corresponding volume.

(4)
(d)

Show that this volume is a maximum.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
base (40 − 2x) by (25 − 2x), height xM1
expands x(40 − 2x)(25 − 2x) to the given resultA1
Part (b)
x is a length so x > 0, and the width 25 − 2x must be positive, so x < 12.5B1
Part (c)
dV/dx = 12x2 − 260x + 1000M1
3x2 − 65x + 250 = 0, so (x − 5)(3x − 50) = 0M1
x = 5 (rejecting 50/3 because it exceeds 12.5)A1
V = 2250 cm3A1
Part (d)
d2V/dx2 = 24x − 260M1
at x = 5: −140 < 0, so maximumA1

Exam tip: Always test each solution against the physical range. Here 50/3 would need squares wider than half the short side of the card.

11IALM-P2-7-B-07 P2 · ASMedium9 marks

The graph G of the polynomial function p(x) = x3 − 3x − 2 is to be sketched by first locating its turning points and its intercepts with both axes.

(a)

Show that x3 − 3x − 2 = (x + 1)2(x − 2).

(1)
(b)

Find the coordinates of the stationary points of G and determine their nature.

(4)
(c)

Sketch G, showing the coordinates of the points where G meets the coordinate axes and of the stationary points.

(2)
(d)

Hence find the set of values of k for which the equation x3 − 3x − 2 = k has three distinct real solutions.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
(x2 + 2x + 1)(x − 2) = x3 − 2x2 + 2x2 − 4x + x − 2 = x3 − 3x − 2B1
Part (b)
dy/dx = 3x2 − 3B1
x = ±1M1
(−1, 0) and (1, −4)A1
d2y/dx2 = 6x: −6 < 0 so (−1, 0) maximum; 6 > 0 so (1, −4) minimumA1
Part (c)
cubic shape rising from bottom left, with a maximum touching the x-axis at (−1, 0) and a minimum at (1, −4)B1
crosses the y-axis at (0, −2) and the x-axis at (2, 0)B1
Part (d)
the line y = k must lie strictly between the two stationary valuesM1
−4 < k < 0A1

Model sketch

OxyG(−1, 0) maximum(1, −4) minimum(0, −2)(2, 0)
Figure: model sketch of G

Exam tip: A repeated factor such as (x + 1)2 means the curve touches the x-axis there, so that point is also a stationary point.

12IALM-P2-7-B-08 P2 · ASMedium8 marks

Two cubic functions are given by f(x) = x3 − 3x2 + 7x − 2 and g(x) = x3 + kx2 + 12x − 5, where k is a constant, x ∈ ℝ.

(a)

By completing the square, show that f is an increasing function.

(4)
(b)

Find the set of values of k for which g′(x) > 0 for every real value of x.

(4)
Show mark scheme
AnswerMarkNotes
Part (a)
f′(x) = 3x2 − 6x + 7B1
3(x2 − 2x) + 7 = 3(x − 1)2 − 3 + 7M1
= 3(x − 1)2 + 4A1
(x − 1)2 ≥ 0, so f′(x) ≥ 4 > 0 for all x; hence f is increasingA1
Part (b)
g′(x) = 3x2 + 2kx + 12B1
positive for all x when the discriminant is negative: (2k)2 − 4(3)(12) < 0M1
k2 < 36A1
−6 < k < 6A1

Exam tip: A quadratic with a positive leading coefficient is positive for every x exactly when it has no real roots: discriminant &lt; 0.

13IALM-P2-7-B-09 P2 · ASMedium7 marks

A flower bed is in the shape of a sector of a circle with radius r metres and angle θ radians. The bed is edged all the way round its perimeter (the two radii and the arc) with 36 m of edging. The area of the bed is A m2. (Arc length = rθ and sector area = ½r2θ.)

r mθ
Figure: the flower bed: a sector of radius r m and angle θ radians (not to scale)
(a)

Show that A = 18r − r2.

(3)
(b)

Use calculus to find the maximum area of the flower bed, justifying that it is a maximum.

(3)
(c)

Find the value of θ when the area is a maximum.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
2r + rθ = 36M1
θ = (36 − 2r)/rA1
A = ½r2 × (36 − 2r)/r = 18r − r2 as requiredA1
Part (b)
dA/dr = 18 − 2r = 0, so r = 9M1
A = 81 m2A1
d2A/dr2 = −2 < 0, so maximumB1
Part (c)
θ = (36 − 18)/9 = 2 radiansB1

Exam tip: Eliminate the angle first: the constraint (the perimeter) gives θ in terms of r, and only then can the area be differentiated.

14IALM-P2-7-B-10 P2 · ASMedium8 marks

For non-zero real values of x, a function is given by y = f(x) = x2 − 54/x. Its graph has exactly one turning point, which lies to the left of the y-axis.

(a)

Find the coordinates of this stationary point.

(4)
(b)

Determine the nature of the stationary point.

(2)
(c)

Show that y is increasing for all x > 0.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
writes 54/x as 54x−1 and differentiatesM1
dy/dx = 2x + 54x−2A1
2x = −54/x2, so x3 = −27M1
(−3, 27)A1
Part (b)
d2y/dx2 = 2 − 108x−3M1
at x = −3: 2 + 4 = 6 > 0, so a minimumA1
Part (c)
for x > 0, 2x > 0 and 54/x2 > 0M1
so dy/dx > 0 for all x > 0, hence y is increasing thereA1

Model sketch

Oxyy = f(x)(−3, 27) minimum
Figure: model sketch of y = f(x): one stationary point, a minimum at (−3, 27)

Common error: Differentiating −54x−1 as −54x−2. Multiplying by the power −1 changes the sign: the result is +54x−2.

15IALM-P2-7-FB-05 P2 · ASMedium8 marks

Figure 1 shows the curve C with equation y = 2x + 8⁄x2, x > 0. The point M is the stationary point of C. The dashed line y = k, where k is a constant, meets C at two points.

1234567246810121416xyOy = kMC
(a)

Find dy/dx.

(2)
(b)

Find the coordinates of M.

(2)
(c)

Find d2y/dx2 and use it to show that M is a minimum point.

(2)
(d)

Using Figure 1, find the set of values of k for which the line y = k meets C at two distinct points.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
writes 8⁄x2 as 8x−2 and differentiates, power reduced by oneM1
dy/dx = 2 − 16x−3A1
Part (b)
2 = 16/x3, so x3 = 8M1
M(2, 6)A1
Part (c)
d2y/dx2 = 48x−4M1
at x = 2: 48/16 = 3 > 0, so M is a minimumA1
Part (d)
the line must lie above the minimum point, since C rises without limit on both sides of MM1
k > 6 ft their MA1

Common error: Writing k ≥ 6. When k = 6 the line touches C at M only, which is one point, not two.

16IALM-P2-7-FB-06 P2 · ASMedium9 marks

Figure 1 shows part of the curve with equation y = x3 + px2 + qx + r, where p, q and r are constants. The curve has a maximum point A and a minimum point B, whose x-coordinates can be read from the grid. The curve crosses the y-axis at (0, 2).

−3−2−112345−30−25−20−15−10−551015xyAB(0, 2)
(a)

Using Figure 1, explain why dy/dx = 3(x + 1)(x − 3).

(2)
(b)

Hence find the values of p, q and r.

(3)
(c)

Find the coordinates of A and of B.

(2)
(d)

Use the second derivative to confirm that A is a maximum point.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
dy/dx = 3x2 + 2px + q, a quadratic with leading coefficient 3B1
dy/dx = 0 at the stationary points, where x = −1 and x = 3 from the figure, so (x + 1) and (x − 3) are factorsB1
Part (b)
3(x + 1)(x − 3) = 3x2 − 6x − 9 and compares coefficientsM1
p = −3, q = −9A1
r = 2 from the y-interceptB1
Part (c)
substitutes x = −1 and x = 3 into y = x3 − 3x2 − 9x + 2M1
A(−1, 7) and B(3, −25)A1
Part (d)
d2y/dx2 = 6x − 6M1
at x = −1: −12 < 0, so A is a maximumA1

Exam tip: Differentiating x3 always gives 3x2, so the factorised gradient must start with 3, not 1. Leaving the 3 out halves p and q.

17IALM-P2-7-FB-07 P2 · ASMedium8 marks

Figure 1 shows the curve with equation y = √x, x ≥ 0, and the point A(5, 0). The point P(x, √x) lies on the curve.

1234567123xyOP(x, √x)A(5, 0)y = √x
(a)

Show that AP2 = x2 − 9x + 25.

(2)
(b)

Use calculus to find the value of x for which AP2 is stationary, and show that this gives a minimum.

(3)
(c)

Hence find the exact coordinates of the point on the curve that is closest to A, and the exact shortest distance from A to the curve.

(3)
Show mark scheme
AnswerMarkNotes
Part (a)
AP2 = (x − 5)2 + (√x)2M1
= x2 − 10x + 25 + x = x2 − 9x + 25 as requiredA1
Part (b)
d(AP2)/dx = 2x − 9 = 0M1
x = 4.5A1
second derivative = 2 > 0, so a minimumB1
Part (c)
y = √4.5 = 3√2/2, so the point is (9/2, 3√2/2) ft their xB1
AP2 = 20.25 − 40.5 + 25 = 19/4M1
shortest distance √19/2 (≈ 2.18)A1

Exam tip: Minimise AP2 rather than AP: the distance is never negative, so AP and AP2 are least at the same point, and AP2 has no square root to differentiate.

18IALM-P2-7-FB-08 P2 · ASMedium8 marks

Figure 1 shows part of the curve with equation y = 9 − x2. The point P(x, 9 − x2) lies on the curve, with 0 < x < 3, and N is the point on the x-axis vertically below P. The shaded triangle OPN, where O is the origin, has area A.

12312345678910xyOPN(3, 0)y = 9 − x²
(a)

Show that A = ½(9x − x3).

(2)
(b)

Explain why the condition 0 < x < 3 is needed.

(1)
(c)

Use calculus to find the exact value of x for which A is stationary.

(3)
(d)

Find the exact maximum area of the triangle, and justify that it is a maximum.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
ON = x and PN = 9 − x2B1
A = ½x(9 − x2) = ½(9x − x3) as requiredA1
Part (b)
x = 0 or x = 3 gives no triangle, and for x > 3 the point P lies below the x-axisB1
Part (c)
dA/dx = ½(9 − 3x2)M1
9 − 3x2 = 0, so x2 = 3M1
x = √3 (rejecting −√3)A1
Part (d)
A = ½√3(9 − 3) = 3√3A1
d2A/dx2 = −3x = −3√3 < 0, so a maximumB1

Common error: Using the height 9 for every triangle. The height PN changes as P moves along the curve: it is the y-coordinate of P, 9 − x2.

19IALM-P2-7-FB-09 P2 · ASMedium9 marks

The temperature θ °C at the centre of a compost heap is monitored for 9 days. A model for θ is θ = 10 + ¼(9t2 − t3), 0 ≤ t ≤ 9, where t is the time in days. Figure 1 shows the graph of θ against t given by the model.

123456789510152025303540t / daysθ / °CO
(a)

Use Figure 1 to estimate the greatest temperature predicted by the model and the time at which it occurs.

(2)
(b)

Use calculus to confirm the time at which the temperature is greatest, find the exact greatest temperature, and justify that it is a maximum.

(4)
(c)

Find the time at which the temperature is rising most rapidly, and the rate of increase at that time.

(3)
Show mark scheme
AnswerMarkNotes
Part (a)
t = 6 (allow 5.5 to 6.5)B1
θ ≈ 37 (allow 36 to 38)B1
Part (b)
dθ/dt = ¼(18t − 3t2)B1
¾t(6 − t) = 0, so t = 6 (t = 0 is the start of the model)M1
θ = 37 °CA1
d2θ/dt2 = ¼(18 − 6t) = −4.5 < 0 at t = 6, so a maximumB1
Part (c)
sets d2θ/dt2 = 0, i.e. maximises dθ/dtM1
t = 3 daysA1
rate = ¼(54 − 27) = 6.75 °C per dayA1

Exam tip: “Rising most rapidly” asks for the greatest value of the gradient dθ/dt, so differentiate the gradient and set that equal to zero. On the graph this is where the curve is steepest, not where it is highest.

20IALM-P2-7-FB-10 P2 · ASMedium9 marks

Figure 1 shows an open-topped box (with no lid) made from thin card. The box has a square base of side x cm and height h cm. A vertical partition of card, also x cm by h cm, divides the box into two equal compartments. The total area of card used for the base, the four sides and the partition is 1200 cm2. The volume of the box is V cm3.

x cmx cmh cmpartitionOpen top (no lid)
(a)

Show that V = 240x − 1⁄5x3.

(3)
(b)

Use calculus to find the value of x for which V is stationary, and find this value of V.

(4)
(c)

Justify that this value of V is a maximum, and find the height of the box in this case.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
x2 + 4xh + xh = 1200M1
h = (1200 − x2)/(5x)A1
V = x2h = x(1200 − x2)/5 = 240x − 1⁄5x3 as requiredA1
Part (b)
dV/dx = 240 − 3⁄5x2M1
x2 = 400M1
x = 20A1
V = 3200 cm3A1
Part (c)
d2V/dx2 = −6⁄5x = −24 < 0, so a maximumB1
h = 8 cmB1

Common error: Leaving out the partition, or including a lid. Count the card piece by piece from Figure 1: one base, four sides and one partition, which is x2 + 5xh.

21IALM-P2-7-B-11 P2 · ASHard11 marks

A closed box is a cuboid with a rectangular base of length 2x cm and width x cm, and height h cm. The volume of the box is 576 cm3. The total surface area of the box is S cm2.

2x cmx cmh cm
Figure: the closed box (not to scale)
(a)

Show that S = 4x2 + 1728/x.

(4)
(b)

Use calculus to find the value of x for which S is stationary, and the corresponding value of S.

(4)
(c)

Justify that this value of S is a minimum.

(2)
(d)

State the dimensions of the box with the least surface area.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
2x2h = 576, so h = 288/x2M1
S = 2(2x × x) + 2(2xh) + 2(xh)M1
= 4x2 + 6xhA1
= 4x2 + 6x × 288/x2 = 4x2 + 1728/x as requiredA1
Part (b)
differentiates, power of 1728x−1 reducedM1
dS/dx = 8x − 1728/x2A1
x3 = 216, so x = 6A1
S = 432 cm2A1
Part (c)
d2S/dx2 = 8 + 3456/x3M1
at x = 6: 8 + 16 = 24 > 0, so minimumA1
Part (d)
12 cm by 6 cm by 8 cmB1

Exam tip: Count the faces carefully before writing S: a closed cuboid has three pairs of equal faces, and each pair contributes twice its area.

22IALM-P2-7-B-12 P2 · ASHard11 marks

An open-topped water tank is a cylinder of radius r metres and height h metres, with a base but no lid. It is made from 108π m2 of sheet metal, all of which is used for the base and the curved side. The volume of the tank is V m3.

(a)

Show that V = 54πr − ½πr3.

(4)
(b)

Use calculus to find the value of r for which V is stationary, and find this value of V, giving your answer as an exact multiple of π.

(4)
(c)

Justify that this value of V is a maximum.

(2)
(d)

Show that, when V is a maximum, the height of the tank equals its radius.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
πr2 + 2πrh = 108πM1
h = (108 − r2)/(2r)A1
V = πr2h with their h substitutedM1
= πr(108 − r2)/2 = 54πr − ½πr3 as requiredA1
Part (b)
dV/dr = 54π − (3/2)πr2M1
= 0 gives r2 = 36, so r = 6 (rejecting −6)A1
substitutes r = 6: 324π − 108πM1
V = 216π m3A1
Part (c)
d2V/dr2 = −3πrM1
at r = 6: −18π < 0, so maximumA1
Part (d)
h = (108 − 36)/12 = 6 = rB1

Common error: Using the surface area of a closed cylinder. With no lid there is only one circular end: πr2 + 2πrh.

23IALM-P2-7-B-13 P2 · ASHard13 marks

The curve C has equation y = f(x), where f(x) = ax3 + bx2 + 3 and a and b are constants. The point P(2, −5) is a stationary point of C.

(a)

Show that a = 2 and b = −6.

(5)
(b)

Find the coordinates of the other stationary point of C, and determine the nature of both stationary points.

(4)
(c)

Find the set of values of k for which the equation f(x) = k has three distinct real solutions.

(2)
(d)

Find the set of values of x for which f is decreasing.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
f′(x) = 3ax2 + 2bxB1
f′(2) = 0: 12a + 4b = 0M1
f(2) = −5: 8a + 4b + 3 = −5M1
solves the two equations simultaneously, e.g. subtracting gives 4a = 8M1
a = 2, b = −6A1
Part (b)
f′(x) = 6x2 − 12x = 6x(x − 2) = 0M1
other point (0, 3)A1
f″(x) = 12x − 12M1
f″(0) = −12 < 0 so (0, 3) maximum; f″(2) = 12 > 0 so (2, −5) minimumA1
Part (c)
the line y = k must lie between the minimum and maximum valuesM1
−5 < k < 3A1
Part (d)
6x(x − 2) < 0M1
0 < x < 2A1

Model sketch

OxyC(0, 3) maximum(2, −5) minimum
Figure: model sketch of C: f(x) = k has three distinct solutions for −5 < k < 3

Exam tip: A stationary point gives two equations: the point lies on the curve (use f) and the gradient there is zero (use f′).

24IALM-P2-7-B-14 P2 · ASHard11 marks

A rectangular yard of area 600 m2 is built against the straight wall of a warehouse, which forms one side and needs no fencing. The side opposite the wall has length x metres and is fenced with panels costing £24 per metre. The two sides perpendicular to the wall are fenced with panels costing £16 per metre. The total cost of the fencing is £C.

wall of the warehousex m (£24 per metre)£16 per metrearea 600 m²
Figure: the yard against the wall (not to scale)
(a)

Show that C = 24x + 19200/x.

(3)
(b)

Use calculus to find the exact value of x for which C is stationary.

(4)
(c)

Justify that this value of x gives the minimum cost.

(2)
(d)

Find the minimum cost, giving your answer in the form p√2, and also to the nearest pound.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
perpendicular sides each 600/x mB1
C = 24x + 2 × 16 × 600/xM1
= 24x + 19200/x as requiredA1
Part (b)
differentiates 19200x−1 with power reducedM1
dC/dx = 24 − 19200/x2A1
x2 = 800M1
x = 20√2A1
Part (c)
d2C/dx2 = 38400/x3M1
positive for all x > 0, so a minimumA1
Part (d)
24 × 20√2 + 19200/(20√2) = 480√2 + 480√2M1
£960√2 ≈ £1358A1

Exam tip: Keep the surd until the last line: 19200/(20√2) = 960/√2 = 480√2, so the two parts of the cost are equal at the minimum.

25IALM-P2-7-FB-11 P2 · ASHard13 marks

A closed container is a prism of length L cm whose cross-section is an equilateral triangle of side x cm, as shown in Figure 1. The volume of the container is 54 cm3. The total surface area of the container, including both triangular ends, is S cm2.

x cmx cmL cm
(a)

Show that the area of one triangular end is √3⁄4x2.

(2)
(b)

Show that S = √3⁄2x2 + 216√3⁄x.

(4)
(c)

Use calculus to find the value of x for which S is stationary.

(3)
(d)

Find the exact minimum surface area and the corresponding length of the container.

(2)
(e)

Justify that this value of S is a minimum.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
height of the triangle = x sin 60° = √3⁄2x (or by Pythagoras)M1
area = ½ × x × √3⁄2x = √3⁄4x2 as requiredA1
Part (b)
√3⁄4x2L = 54M1
L = 216/(√3x2) = 72√3/x2A1
S = 2 × √3⁄4x2 + 3xLM1
= √3⁄2x2 + 216√3/x as requiredA1
Part (c)
dS/dx = √3x − 216√3x−2M1
√3x = 216√3/x2, so x3 = 216M1
x = 6A1
Part (d)
S = 18√3 + 36√3 = 54√3 cm2 (≈ 93.5)A1
L = 2√3 cmA1
Part (e)
d2S/dx2 = √3 + 432√3x−3M1
at x = 6: √3 + 2√3 = 3√3 > 0, so a minimumA1

Exam tip: Count the faces from Figure 1 before writing S: two equilateral triangles and three identical rectangles, each x by L. Keep √3 as a common factor so the stationary-point equation stays simple.

26IALM-P2-7-FB-12 P2 · ASHard12 marks

A solid sphere has centre O and radius 6√3 cm. A cylinder of radius r cm and height h cm is cut from the sphere, with the axis of the cylinder passing through O and both circular edges of the cylinder lying on the surface of the sphere. Figure 1 shows a cross-section through O. The volume of the cylinder is V cm3. (The volume of a sphere of radius R is 4⁄3πR3.)

O6√3 cmr cmh cmCross-section (not to scale)
(a)

Show that V = 108πh − ¼πh3.

(3)
(b)

Use calculus to find the value of h for which V is stationary.

(3)
(c)

Find the exact maximum volume of the cylinder, and the exact radius of this cylinder.

(2)
(d)

Justify that this volume is a maximum.

(2)
(e)

Show that the largest cylinder occupies a fraction 1⁄√3 of the volume of the sphere, and give this as a percentage to 3 significant figures.

(2)
Show mark scheme
AnswerMarkNotes
Part (a)
Pythagoras in the cross-section: r2 + (h/2)2 = (6√3)2M1
r2 = 108 − ¼h2A1
V = πr2h = π(108 − ¼h2)h = 108πh − ¼πh3 as requiredA1
Part (b)
dV/dh = 108π − ¾πh2M1
h2 = 144M1
h = 12 (rejecting −12)A1
Part (c)
V = 1296π − 432π = 864π cm3A1
r = √72 = 6√2 cmA1
Part (d)
d2V/dh2 = −3⁄2πhM1
at h = 12: −18π < 0, so a maximumA1
Part (e)
sphere volume = 4⁄3π(6√3)3 = 864√3π, so fraction = 864π/(864√3π) = 1/√3M1
57.7%A1

Common error: Using h instead of h/2 in Pythagoras. The right-angled triangle in Figure 1 runs from O to a corner of the rectangle, so its vertical side is half the height of the cylinder.

27IALM-P2-7-FB-13 P2 · ASHard12 marks

A decorative glass panel is made in the shape shown in Figure 1: a rectangle of width x m and height h m with an equilateral triangle of side x m on its top edge. A metal strip of total length 6 m goes all the way round the outside edge of the panel (the heavy line); there is no strip along the dashed line. The area of the panel is A m2.

x mh mh mx mx mNot to scale
(a)

Show that A = 3x − 6 − √3⁄4x2.

(4)
(b)

Use calculus to find the value of x for which A is stationary, giving your answer in the form a + b√3⁄c, where a, b and c are integers.

(4)
(c)

Justify that this value of x gives the maximum area.

(1)
(d)

Find the maximum area, giving your answer to 3 significant figures.

(2)
(e)

Show that, for the panel of maximum area, the height h is less than the width x.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
3x + 2h = 6M1
h = 3 − 3⁄2xA1
area of triangle = √3⁄4x2B1
A = x(3 − 3⁄2x) + √3⁄4x2 = 3x − 6 − √3⁄4x2 as requiredA1
Part (b)
dA/dx = 3 − 6 − √3⁄2xM1
sets equal to 0 and solvesM1
x = 6/(6 − √3)A1
rationalises: 6(6 + √3)/33 = (12 + 2√3)/11A1
Part (c)
d2A/dx2 = −6 − √3⁄2 < 0 because 6 > √3, so a maximumB1
Part (d)
substitutes x ≈ 1.4058 into AM1
2.11 m2A1
Part (e)
h = 3 − 1.5 × 1.4058 ≈ 0.891 m, which is less than x ≈ 1.41 mB1

Exam tip: The strip runs only round the outside, so the top edge of the rectangle is not included: the perimeter is x + 2h + 2x, not 2x + 2h + 2x.

28IALM-P2-7-FB-14 P2 · ASHard11 marks

The curve C has equation y = f(x), where f(x) = x4 − 6x2 + 8x + 5. Figure 1 shows part of C. The points A and B are the stationary points of C.

−3−2−112−16−8816xyABC
(a)

Show that f′(x) = 4(x − 1)2(x + 2).

(3)
(b)

Find the coordinates of A and of B.

(2)
(c)

Use the second derivative to show that A is a minimum point.

(2)
(d)

Show that the second derivative test fails at B, and determine the nature of B.

(3)
(e)

Find the set of values of x for which f is decreasing.

(1)
Show mark scheme
AnswerMarkNotes
Part (a)
f′(x) = 4x3 − 12x + 8B1
expands 4(x2 − 2x + 1)(x + 2) or uses the factor theoremM1
= 4(x3 − 3x + 2), matching f′(x)A1
Part (b)
x = −2 and x = 1 from f′(x) = 0M1
A(−2, −19), B(1, 8)A1
Part (c)
f″(x) = 12x2 − 12M1
at x = −2: 36 > 0, so A is a minimumA1
Part (d)
at x = 1: f″ = 12 − 12 = 0, so the test gives no conclusionB1
gradient either side, e.g. at x = 0.5: 4(0.25)(2.5) = 2.5, and at x = 1.5: 4(0.25)(3.5) = 3.5M1
positive on both sides, so B is a stationary point of inflectionA1
Part (e)
f′(x) < 0 only when x + 2 < 0: x < −2B1

Exam tip: In factorised form the sign of f′ is easy to read: (x − 1)2 is never negative, so the sign of f′(x) is the sign of x + 2. That explains both the minimum at A and the inflection at B.